Sega Aero City Resurrection
- mastercello
- Posts: 731
- Joined: August 18th, 2008, 11:42 am
- Location: Lucerne, Switzerland
- eBay: mastercello
- Initials: BUS
- Contact:
Sega Aero City Resurrection
A while back i got a cheap Aero City from redstallone.
Was not in a very bad condition, but i took the time and cleaned it up and changed some bad parts like cp surounding, cp, buttons and sticks.
Also resprayed a few parts, they had ugly scratches, to refresh the look of it.
Due to KC went down, my thread there was also lost in space.
Here for all Sega Aero City lovers again the pictures.
Resprayed a few parts outside the house
Almost naked Aero City
Show me your inside :!:
Nanao MS8-26 Monitor/Chassis
Monitor back inside the cab...tate for shooter heaven.
First test with my Batsugun bootleg
Almost done, cp stuff missing.
Had to wait a few days for new cp surrounding, cp, buttons and sticks
And finally all together nice and shiny with a even better "test" pcb inside.
Was not in a very bad condition, but i took the time and cleaned it up and changed some bad parts like cp surounding, cp, buttons and sticks.
Also resprayed a few parts, they had ugly scratches, to refresh the look of it.
Due to KC went down, my thread there was also lost in space.
Here for all Sega Aero City lovers again the pictures.
Resprayed a few parts outside the house
Almost naked Aero City
Show me your inside :!:
Nanao MS8-26 Monitor/Chassis
Monitor back inside the cab...tate for shooter heaven.
First test with my Batsugun bootleg
Almost done, cp stuff missing.
Had to wait a few days for new cp surrounding, cp, buttons and sticks
And finally all together nice and shiny with a even better "test" pcb inside.
Last edited by mastercello on February 13th, 2016, 1:37 pm, edited 1 time in total.
- j69
- Posts: 717
- Joined: August 24th, 2008, 7:23 pm
- Location: Newcastle, England
Re: Sega Aero City Resurrection
nice dood!!! Id love a little shooter cab
- theman
- Posts: 301
- Joined: August 17th, 2008, 5:04 pm
- Location: Ye Olde London Town
- eBay: aero_city
- Initials: RJC
Re: Sega Aero City Resurrection
I'm planing on doing a bit of a tarting up of my aero soon.
- Ringtail
- Please Continue...
- Posts: 106
- Joined: August 17th, 2008, 8:18 pm
- Location:
Re: Sega Aero City Resurrection
Nice looking cab man and a good choice of games
Gotta love Espgaluda II ^^
Gotta love Espgaluda II ^^
People have the right to be stupid, but some abuse that privilege.
- mastercello
- Posts: 731
- Joined: August 18th, 2008, 11:42 am
- Location: Lucerne, Switzerland
- eBay: mastercello
- Initials: BUS
- Contact:
Re: Sega Aero City Resurrection
Thanks boys...i really like this little boy.
- pcb_revival
- Please Continue...
- Posts: 82
- Joined: August 31st, 2008, 4:26 pm
- Location: North West - UK
Re: Sega Aero City Resurrection
Clean job mastercello.
My thoughts.
I aint to keen on the River Service heavy duty CP surround though - why did they go with that design.
Your monitor chassis controls are accessable from the front unlike mine which are side on and are a pain to adjust as you have to go inside the back of the cab. ( Nanao MS8-26SE )
Are you going to fill the holes from the badge in the monitor hood.
My thoughts.
I aint to keen on the River Service heavy duty CP surround though - why did they go with that design.
Your monitor chassis controls are accessable from the front unlike mine which are side on and are a pain to adjust as you have to go inside the back of the cab. ( Nanao MS8-26SE )
Are you going to fill the holes from the badge in the monitor hood.
- mastercello
- Posts: 731
- Joined: August 18th, 2008, 11:42 am
- Location: Lucerne, Switzerland
- eBay: mastercello
- Initials: BUS
- Contact:
Re: Sega Aero City Resurrection
Maybe you can just rotate the pcb by 90 degrees, or is the MS8-26SE completely different from the MS8-26SU version?pcb_revival wrote: Your monitor chassis controls are accessable from the front unlike mine which are side on and are a pain to adjust as you have to go inside the back of the cab. ( Nanao MS8-26SE )
I think i will leave them as they are, don't bother me much.pcb_revival wrote:Are you going to fill the holes from the badge in the monitor hood.
Have you filled up yours?
- AeroCityMayor
- Previously alien_mame
- Posts: 2005
- Joined: July 25th, 2009, 1:05 pm
- Location: West Yorks, UK
- eBay: air_fortless
- Initials: ACM
Re: Sega Aero City Resurrection
Thanks for posting this again mastercello, I looked at this a lot last time when I went to collect mine - shame it wouldn't fit in the car though and I had to use a courier after all :p
Very nice.
Very nice.
- pcb_revival
- Please Continue...
- Posts: 82
- Joined: August 31st, 2008, 4:26 pm
- Location: North West - UK
Re: Sega Aero City Resurrection
Dont know if I could rotate the chassis however my monitor frame does not have the cut out to access the control pots anyway so that option is out.mastercello wrote:
Maybe you can just rotate the pcb by 90 degrees, or is the MS8-26SE completely different from the MS8-26SU version?
Like most Aero cabs mine did not such holes/badge.mastercello wrote:
I think i will leave them as they are, don't bother me much.
Have you filled up yours?
- EveningCommuter
- Please Continue...
- Posts: 21
- Joined: April 17th, 2017, 8:27 am
- Location: Los Angeles, CA, USA
- eBay: SuperGameStorePlus
- Initials: EVN
Re: Sega Aero City Resurrection
I know this thread is old but where did you get the CP Bezel thing?
- mastercello
- Posts: 731
- Joined: August 18th, 2008, 11:42 am
- Location: Lucerne, Switzerland
- eBay: mastercello
- Initials: BUS
- Contact:
Re: Sega Aero City Resurrection
No Problem man...
Got it originally from YHJ auction - but there were made by riverservice.
I can imagine they might still sell them...but not sure, just write them -> http://www.rs2006.co.jp/overseas.htm
Got it originally from YHJ auction - but there were made by riverservice.
I can imagine they might still sell them...but not sure, just write them -> http://www.rs2006.co.jp/overseas.htm
- penrhos
- Panel Beater
- Posts: 1477
- Joined: September 11th, 2008, 12:08 pm
- Location: Leicester - UK
- eBay: ngpd002
Re: Sega Aero City Resurrection
There's been a few original and RS Aero control panel uppers listed on YAJ recently. Have gone quite cheaply too - think one at weekend went for just 5000 YEN. there's also been a couple of NOS overlays turn up.
2 * Vewlix Diamond Blacks,2 * Vewlix-F, 1 * Sega Rally 3, 1 * Video Pinball, 1 * DinoKing (JAMMA Converted).
- NoAffinity
- Posts: 386
- Joined: January 8th, 2017, 3:46 pm
- Location: Escondido, CA, USA
- eBay: noaffinity
- Initials: CSG
- Contact:
Re: Sega Aero City Resurrection
Are you looking to re-finish the CP surround? I just had mine sand blasted an powder coated. I'm not going to put any stickers back on the surround on mine, and the powder coated finish is minty.EveningCommuter wrote:I know this thread is old but where did you get the CP Bezel thing?
Maybe that's not why you're asking or what you're looking to do with yours, but I thought I would throw the suggestion out there.
To the OP, looks great, great job!
- Neuroticmoose
- Please Continue...
- Posts: 6
- Joined: March 26th, 2017, 5:31 am
- Location: United States
- eBay: chaosisbeauty
Re: Sega Aero City Resurrection
Talked to River Service recently, apparently they're moving into wholesale only and won't sell to you unless you make an order of at least 300 dollars
-
- Please Continue...
- Posts: 30
- Joined: October 26th, 2015, 1:17 pm
- Location: germany, berlin
Re: Sega Aero City Resurrection
looks good! i like it
- Mokum
- Please Continue...
- Posts: 599
- Joined: July 27th, 2011, 8:20 am
- Location: Perugia, Italy
- eBay: noizer2k3
- Initials: MKM
Re: Sega Aero City Resurrection
I've never ever understood why this cab got the 1P and 2P buttons holes both on the CP and on the surroundings
alienmame wrote:Christ on a bike man
- NoAffinity
- Posts: 386
- Joined: January 8th, 2017, 3:46 pm
- Location: Escondido, CA, USA
- eBay: noaffinity
- Initials: CSG
- Contact:
Re: Sega Aero City Resurrection
Haha yeah, that's a head scratcher. I have the start button in the hole close to the joystick in my 1l7b panel, and randomly bush it while playing. Taunting at undesirable times in sf alpha 2 is never productive. Thinking about relocating it to the surround.Mokum wrote:I've never ever understood why this cab got the 1P and 2P buttons holes both on the CP and on the surroundings
- copados33
- Please Continue...
- Posts: 538
- Joined: March 20th, 2013, 1:30 pm
- Location: Uruguay South America
- eBay: psycho-q
Re: Sega Aero City Resurrection
Because Mahjong control panels do not have start buttons.Mokum wrote:I've never ever understood why this cab got the 1P and 2P buttons holes both on the CP and on the surroundings
- Mokum
- Please Continue...
- Posts: 599
- Joined: July 27th, 2011, 8:20 am
- Location: Perugia, Italy
- eBay: noizer2k3
- Initials: MKM
Re: Sega Aero City Resurrection
My life is now fulfilled!copados33 wrote:Because Mahjong control panels do not have start buttons.Mokum wrote:I've never ever understood why this cab got the 1P and 2P buttons holes both on the CP and on the surroundings
Thanks!!
alienmame wrote:Christ on a bike man